VPN Setup on Firewalla
This guide shows how to set up an OpenVPN client on Firewalla so you can route selected devices through a VPN service.
Setup Steps
Create a VPN Connection
Open the Firewalla app, tap VPN Client, then + Create VPN Connection. Choose 3rd-Party VPN, select OpenVPN, and import your .ovpn profile. Enter the VPN service credentials (often different from your app login) and save.
Select Devices
Devices must be in the Firewalla overlay network or in router mode. In DHCP mode, devices are already in the overlay. In Simple mode, assign a static IP. Assign the VPN to a specific device or a device group/VLAN.
Connect to the VPN
From VPN Client, toggle the connection On. Or from a device or group, choose the VPN profile. Status should show Connected.
Quick Checks
- Firewalla VPN Client does not support IPv6 (IPv6 traffic is blocked when VPN is on)
- If the .ovpn file has multiple
remotelines, keep only one - If VPN connects but apps fail, try a different server or location
Need Help Now?
Need help with Firewalla VPN?
We can configure VPN on your Firewalla as part of an installation or support visit.