Renovation Pre-Wire Checklist
This page owns the educational pre-wire checklist for renovations. Use it to make sure you do not miss critical cabling before the walls are closed.
Pre-Wire Checklist
Ensure these critical cable runs are included in your renovation plan.
Wi-Fi Access Points
Ceiling-mounted locations in central areas of each floor.
- 1x Cat6 per AP
- Central hallway/landing
- Outdoor coverage points
TV & Media Points
Wired connections for every TV location to ensure 4K stability.
- 2x Cat6 per TV
- Main living areas
- Master bedroom
Security Cameras
External corners and entry points for full perimeter coverage.
- 1x Cat6 per camera
- PoE capable cabling
- NVR location
Smart Home & Lighting
Cabling for keypads, touchscreens, and centralised control.
- Bus cabling (KNX/Lutron)
- Neutral wires at switches
- Controller location
The Planning Process
How to turn this educational checklist into a successful renovation plan.
Design & Review
Review floor plans and identify usage patterns for every room.
Cable Schedule
Create a detailed list of every cable, its type, and its destination.
First Fix Audit
Verify all cables are in the correct locations before walls are closed.
Termination & Test
Properly terminate all cables to patch panels and test for continuity.
Common Mistakes to Avoid
Avoid these frequent pitfalls that lead to poor performance.
- Relying on Wi-Fi for everything: Always wire stationary devices (TVs, PCs, Consoles).
- Poor AP placement: Don't hide access points in cupboards or behind TVs.
- Undersized conduits: Ensure conduits are large enough for future cable pulls.
- No documentation: Ensure you have a record of where every cable runs.
- Ignoring outdoor areas: UAE lifestyle often involves outdoor spaces; don't forget the garden.
Related Resources
Start with the checklist, then move to broader infrastructure education or planning help depending on your stage.
Support Pricing & Warranty
We keep pricing clear and consistent so you know what to expect.
- Initial callout: AED 500 + VAT
- Labour: AED 350 per hour + VAT (charged by the hour)
- Out of hours: 200% labour rate (weekends, holidays, and 7 PM - 8 AM)
If the issue is resolved remotely, we will always do that first.
Warranty (Systems We Supply)
Where we supply the hardware, we provide a 12-month workmanship warranty (unless stated otherwise) and assist with manufacturer warranty claims.
Client-Provided Hardware
If the issue relates to hardware that we did not supply:
- Support is provided on a best-effort basis.
- We may recommend replacement rather than prolonged troubleshooting.
- We cannot warranty third-party equipment, existing cabling, or prior workmanship.
Ready to move from checklist to project scope?
Use the renovations service when you need contractor coordination, delivery planning, or room-by-room infrastructure design.